Hybrid
Timber Touch flooring is a unique blend of natural timber look designs representing the next generation in flooring technology.
5.5mm Hybrid Flooring
The perfect solution for our modern indoor/outdoor lifestyle.
| Colour | Size | Wear Layer Thickness |
|---|---|---|
| Bondi Oak | 120 x 180 x 5.5 mm | 0.3mm | Hampton Oak | 120 x 180 x 5.5 mm | 0.3mm |
| Natural Oak | 120 x 180 x 5.5 mm | 0.3mm |
- Click colour swatch to open gallery
6.5mm Premium Hybrid Flooring
Every plank is designed to give you the most beautiful colours and grain structures.
| Colour | Size | Wear Layer Thickness |
|---|---|---|
| Ash Oak | 1524 x 228 x 6.5mm | 0.5mm |
| Blackbutt | 1524 x 228 x 6.5mm | 0.5mm |
| Coastal Oak | 1524 x 228 x 6.5mm | 0.5mm |
| Greystone Oak | 1524 x 228 x 6.5mm | 0.5mm |
| Spotted Gum | 1524 x 228 x 6.5mm | 0.5mm |
| Tasmanian Oak | 1524 x 228 x 6.5mm | 0.5mm |
Hybrid Flooring features
Timber Touch represents the latest in next generation flooring technology. Timber Touch is a trouble free flooring solution utilising the latest technology in Stone & Plastic Polymer composite structure, which is resistant to fluctuation of Australia’s harsh climate. Able to withstand direct heat, extreme cold and with the lowest expansion rates. Timber Touch is a perfect solution for our modern indoor/outdoor lifestyle. Cleaning is a breeze with Timber Touch, 100% waterproof mappable surface - dry or wet maintenance is perfectly acceptable, the choice is yours. Not only is Timber Touch a high performance floor, we have meticulously chosen our flooring designs to be ‘realistic to nature.’ Every plank is designed to give you the most beautiful colours and grain structures that combine to recreate the perfect timber floor.
The flooring is made from stone powder and plastic material which gives the flooring strength and durability. It is designed as a floating floor system making it easy to install without the use of glue during installation. With a click lock joint system , they can be easily installed. This flooring comes with IXPE black underlay that delivers excellent noise reduction capabilities.
100% Waterproof
High impact resistance
Pre-adhered Underlay
Easy DIY Locking System
High Dimensional Stability
Embossed Wood Grain Texture
Phthalate Free, Eco Friendly
Stain Proof
UV Stabilised
High Grade Wear Resistant
Termite Resistant
Suitable for Under Floor Heating
Board Construction
1 Commercial grade wear layer
A hard wearing surface with high impact resistance and natural wood embossing.
2 High definition designs
Available in a variety of natural colours with designs that are true to nature.
3 Click system
Easy to assemble gluelss high strength click system.
4 Stone / PVC composite core
Proprietary Quantum Core Stone / PVC Composite core which is 100% waterproof and provides outstanding impact resistance and durability. This unique formula enhances the Rigid Plank strength under all temperatures whilst providing minimal expansion and contraction.
5 Acoustic backing
Every plank has a pre-adhered underlay for excellent acoustics and underfoot comfort.
Installation method
Preparations
- The surface of the floor must be clean and stable.
- The surface of the floor must be flat with a tolerance of no more than 3mm over 3m.
- Any polish, dirt, paint, etc must be removed from the job surface.
- The floor surface must be flat and leveled with a scraper and putty knife.
- Maintain the roof temperature above 15°C (59°F) before installation.
- Check that the door can still open and close after the floor has been installed (minimum + 1cm (3/8″)).
Installation
- Ensure that all installing products must be the same lot numbers.
- Position the plank to be installed at an angle of 15° to 20° to the plank already installed.
- Move the plant gently up and down and at the same time exert forward pressure.
- The planks will automatically click into place.
- You can either insert the tongue in the groove, or the groove into the tongue.
- The tongue in groove method is the most common and the easiest way. Please refer to the installation diagrams for more details.
Site condition
- Existing floor surface level must be within acceptable level with a tolerance level of 1mm only. Otherwise, this will cause high low between vinyl planks and waviness effect after completion.
- Is is advisable to do self-leveling cement before laying vinyl plank for eneven floor.
- For vinyl glue-on, floor and wall (if any) moisture must be within acceptable range. Otherwise, it is advisable to apply water proof liquid before slef-leveling cement for floor and primer for wall.
- Uneven wall surface will cause a gap between vinyl and wall, it is advisable to skim coat the gap when floor completed. This can be substituted with wall skirting.
- If floor skirting is excluded, it is advisable for vinyl plank to be installed first before any wall panel / partition / furniture lay to avoid visible gap between wall and vinyl plank. In this installation, floor cover is compulsory to protext the completed vinyl flooring.
- If floor skirting is included, it is advisable for vinyl plank to be installed last to avoid damage to the vinyl flooring.
Quality Tested
